If you're unable to flash Clockworkmod 5 to your
MTK Android phone (e.g Tecno, Gionee, Infinix,
Opsson, Innjoo, Lead1, TLC etc) for whatever reason
then here's a guide on how to manually flash it.
* Note that the procedure is the same for
MTK based Android phones.
Requirement
1. Download MTK droid tools
2. Download PdaNet
3. A PC
4. USB cord
5. A working phone (this is needed to install Mediatek
drivers; its ok whether rooted or not)
6. The phone you wish to flash CWM to (might be the
same phone as that above if its not bricked but needs to
be rooted for this purpose)
7. Make an MTK backup first just in case something
goes wrong (
Procedure
1. Enable USB debugging on a working phone
(Settings > Developer > Tick USB Debugging. If no
Developer under Settings then go to Settings > About
> Keep tapping Build Number till Developer appears
under Settings ) and connect it to the PC
2. With the phone connected, install PdaNet (Select
Other from the list ; you should see "Drivers
Successfully Installed" at the end of installation) .
3. Launch MTK Droid tools
4. MTK Droid tools should display the phone's details
by the left
4a. If it doesn't detect the phone then boot the phone
into factory mode (volume decrease + power button)
5. The box at the bottom should be yellow
6. Click Root at the bottom of MTK and select Yes if
prompted on PC and Grant on phone
7. A green bar should load and the yellow box should
become green
8. Click on the root,backup,recovery tab at the top
9. Click Backup and wait for the backup process to be
complete
10. When prompted to pack backup, select No.
11. When backup is complete, tick 'To select boot.img' (if
you don't have the boot.img file then tick 'To select
Boot from phone' )
11a. Click Recovery and Boot
12. If a Window pops up, select the boot file from the
MTK backup you just made (MTK folder > Backups >
Phone backup)
13. Click Yes to every prompt you get
14. When promoted to boot into recovery mode, click
Yes
15. The phone should now boot into clockworkmod
recovery mode
0 comments: